Category: Air cooled chiller

Air cooled chiller

Air cooled modular Chiller production line view

Dekonpower

Dekon Air cooled modular Chiller production line

R22, R410A, R407C all available.

DEKON Air cooled modular chiller air cooled modular chiller

 

Air cooled chiller

Parts assambling for air cooled modular chiller

Dekonpower
Image
Air cooled chiller

chiller Enfriados por aire

Dekonpower

chiller Enfriados por aire

Chiller modular enfriado por aire
El chiller modular enfriados por aire de la serie DACC esta diseñado en base al concepto modular y cuenta tan solo con la bomba de calefacción y el sistema de enfriamiento. Esta en capacidad de controlar de manera efectiva su capacidad, de acuerdo con el encendido y apagado del compresor, además puede aumentar su desempeño por menos tiempo de encendido y apagado que un solo sistema compresor. La corriente de encendido del chiller modular enfriado/condensado por aire es controlada a un nivel mínimo. Debido a que los compresores se encienden un por uno, el cable de suministro de energía será mucho mas pequeño que el de un solo compresor. En el caso de que uno de los compresores falle, el resto de los compresores puede seguir operando de manera normal y el impacto en el funcionamiento general seria muy bajo. El costo de remplazar el compresor es muy bajo, ya que son más pequeños que otros compresores. El rollo paralelo del compresor es 7% mas eficiente que las máquinas con tornillos, cuando están cargados completamente y son entre 15% y 20% más eficientes si su carga es parcial.

Nota de DEKON Chiller modular enfriado por aire

1. Las unidades mencionadas pueden realizar entre 1-7 conexiones modulares y pueden controlar de manera automática la energía.2. Condiciones estándar para enfriamiento: Temperatura ambiente DB 35℃, WB24℃Entrada de agua 12℃, salida 7℃3. Condiciones estándar para calefacción: Temperatura ambiente DB 7℃, WB 6℃Entrada de agua 40℃, salida 45℃4. Los datos relacionados con el nivel de ruido han sido medidos, ubicados a una distancia promedio de 1m de la unidad..5. Presión máxima de los rodamientos: 1.0Mpa
Accesorios opcionales1. Calentador eléctrico
2. Interruptor para flujo de agua
3. Caucho absorbente
4. Unión flexible para tubería de agua
5. Filtro
6. Bomba de agua
7. Sistema de recuperación de agua
8. Monitoreo a través de control remoto

Air cooled chiller

Water Cooling Tower Water Volume: 600m3/h

Dekonpower

cooling tower

cooling tower specs

Wet Cooling Tower/water cooling tower

Water Volume: 600m3/h

Size: 6x6x6.6meters.

The inlet temperature of the wet-bulb temperature 20.0 ° C

Input dry bulb temperature of 29.0 ° C

Working temperature of the liquid at the inlet 33.0 ° C

The working fluid temperature at the outlet 27.0 ° C

Operating mode: Wet

NINGBO DEKON REFRIGERATION EQUIPMENT CO., LTD
Add:Air port logistic park, Ningbo,. P.R China
TEL: +86-574-88152763   FAX: +86-574-62131001
Mob1: +86-5356475680    Mob2:+86-13736095002
SKYPE:auxlsc5002
Air cooled chiller

Air cooled water chiller

Dekonpower

Air cooled water chiller

Air cooled water chiller china professional supplier

Dekon air cooled water chiller,stable and trust parts used.

1. Cooling capacity range: 151.2 kW to 752.4 kW
Hermetic scroll compressor for model 150 to 180,
Semi-hermetic screw compressor for model 250 to 760.

2. Options for Freon: R22,R407c,R134a or R410a all available;

3. T1 and T3 conditions both available;

4. Power supply with 380-440V 3Ph- 50/60Hz

Each compressor is equipped with a crankcase heater and a thermal overload cut-out;

The screw compressor is also complete with a built-in electronic protection with temperature
sensor located directly in the motor winding and on the discharge line;

External rotor type axial fans, equipped with three phase direct drive motor,low noise 8 poles;

Protection level IP54, provided with a protective outlet grille.

Evaporator built with high effciency shell and tube type heat exchanger;

Factory insulated with fexible close cell material.

Condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins;

Refrigerant circuit complete with charge valves, flter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch.

The heat pump unit is completed with 4-way valve, liquid receiver and one way valve

Hydraulic circuit built with galvanized pipe, complete with water discharge connection for shell and tube heat exchanger and fange type hydraulic connectors;

Electric panel consist of: compressor contactor, fan motor contactor, compressor isolating switch, fan protection breaker, phase sequence relay and microprocessor with function
display.

Automatic operation dramatically reducing maintenance cost

OPTIONAL FUNCTIONS
1. Metallic flter for hydraulic circuit
2. Rubber antivibration mounting
3. Remote condenser
4. BMS
5. Modular design
6. T3 (Tropical climate)
7. Heat recovery
8. Plate heat exchanger

NINGBO DEKON REFRIGERATION EQUIPMENT CO., LTD
Add:Air port logistic park, Ningbo,. P.R China
TEL: +86-574-88152763   FAX: +86-574-62131001
Mob1: +86-5356475680    Mob2:+86-13736095002
SKYPE:auxlsc5002 dekon@dekon-hvac.com
Air cooled chiller

Air Cooled Mini Chiller

Dekonpower

Dekon Air Cooled Mini Chiller

Dekon Air Cooled Mini Chiller:

1. Cooling capacity:5.5kW-30kW
Heating capacity:6.2kW-34kW

2. Options for Freon: R22,R407c,R134a or R410a all available;

3. T1 and T3 conditions both available;

4. Power supply with 220V-50/60Hz, 380-440V 3Ph- 50/60Hz

Mini Air Cooled Water Chiller:
STRUCTURE
Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

HERMETIC COMPRESSOR
Single phase rotary type (for model 05 only) and 3-phase scroll compressor (model 08-30),;
With thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.

AXIAL FAN
External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.

EVAPORATOR
High efficiency brazed stainless steel plate exchanger, factory insulated with flexible close cell material.

CONDENSER
Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, protected with flexible plastic grill.

DESUPERHEATER
High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material. (optional)

REFRIGERANT CIRCUIT
Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset.
The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.

HYDRONIC CIRCUIT
Built with air vent valve, water drain connection, and female-threaded hydraulic connectors.

ELECTRIC PANEL
Consists of:
Compressor contactor;
Compressor protection breaker;
Fan motor protection breaker;
Control circuit protection breaker;
Phase sequence relay (only for 3-phase power supplied units);
Programmable microprocessor controller

OPTIONAL
Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed.

For more products plw check our webpage.

NINGBO DEKON REFRIGERATION EQUIPMENT CO., LTD
Add:Air port logistic park, Ningbo,. P.R China
TEL: +86-574-88152763   FAX: +86-574-62131001
Mob1: +86-5356475680    Mob2:+86-13736095002
SKYPE:auxlsc5002
Air cooled chiller

Air cooled water chiller cooling

Dekonpower

Dekon air cooled water chiller cooling

Air cooled water chiller system in full capacity.

Dekon air cooled water chiller cooling

1. Cooling capacity range: 151.2 kW to 752.4 kW
Hermetic scroll compressor for model 150 to 180,
Semi-hermetic screw compressor for model 250 to 760.

2. Options for Freon: R22,R407c,R134a or R410a all available;

3. T1 and T3 conditions both available;

4. Power supply with 380-440V 3Ph- 50/60Hz

Each compressor is equipped with a crankcase heater and a thermal overload cut-out;

The screw compressor is also complete with a built-in electronic protection with temperature
sensor located directly in the motor winding and on the discharge line;

External rotor type axial fans, equipped with three phase direct drive motor,low noise 8 poles;

Protection level IP54, provided with a protective outlet grille.

Evaporator built with high effciency shell and tube type heat exchanger;

Factory insulated with fexible close cell material.

Condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins;

Refrigerant circuit complete with charge valves, flter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch.

The heat pump unit is completed with 4-way valve, liquid receiver and one way valve

Hydraulic circuit built with galvanized pipe, complete with water discharge connection for shell and tube heat exchanger and fange type hydraulic connectors;

Electric panel consist of: compressor contactor, fan motor contactor, compressor isolating switch, fan protection breaker, phase sequence relay and microprocessor with function
display.

Automatic operation dramatically reducing maintenance cost

OPTIONAL FUNCTIONS
1. Metallic flter for hydraulic circuit
2. Rubber antivibration mounting
3. Remote condenser
4. BMS
5. Modular design
6. T3 (Tropical climate)
7. Heat recovery
8. Plate heat exchanger

For more products pls check: http://www.dekon-china.com

NINGBO DEKON REFRIGERATION EQUIPMENT CO., LTD
Add:Air port logistic park, Ningbo,. P.R China
TEL: +86-574-88152763   FAX: +86-574-62131001
Mob1: +86-5356475680    Mob2:+86-13736095002
SKYPE:auxlsc5002